Pro-Ject Phono Box RS2

Form
Ridicare gratuita din showroom

Varianta selectata: Silver

Cod produs: 9120097825353

Intreaba cand revine

6.399 lei / Bucata 7.999 lei

    • 30 de zile perioada de retur
    • Garantie 24 luni
    • Transport gratuit pentru comenzi peste 100 RON in Romania
    • Livrare prin curier sau ridicare din showroom Bucuresti
    Bank logo
    3 Rate
    Card Avantaj
    Bank logo
    3 Rate
    Alpha Bank
    Bank logo
    3 Rate
    BRD
    Bank logo
    3 Rate
    Banca Transilvania
    Bank logo
    3 Rate
    Garanti Bank
    Bank logo
    12 Rate
    Raiffeisen Bank (in showroom)

    Descriere

    • Preamplificator phono Highend
    • Constructie balansata MM / MC
    • Gain intre 40 si 70 dB
    • Intrare / Iesire - RCA + XLR

    Alte informatii

    Link producator: click aici

    Fisa de produs: descarca fisierul
    Bundle image

    Cauti un pachet PROMO personalizat

    Spune-ne de ce ai nevoie si revenim cu o oferta " de nerefuzat "

    Phono Box RS2

    Fully balanced, fully discrete phono preamp of the highest class

    Reference class phono preamplifier with unique impedance control

    The Phono Box RS2 is the ultimate phono preamplifier of the highest class. It is fully balanced from the input to the output. Electronics are fully discrete, no op-amps are in use and it uses split passive RIAA and DECCA equalization.

    Discrete Circuitry

    A discrete circuit is composed of electronic components which are disparate, individual devices, also called discrete components. These can be “passive” components, like resistors, capacitors and inductors, as well as “active” components, which in our case are transistors. The opposite to this would be an integrated circuit, which uses operational amplifiers (Op-Amps) in the signal chain. Countless hours of listening tests and years of experience have shown us that even the very best Op-Amps do not tend to be so neutral, natural, dynamic or vivid. Standard phono pre-amplifiers with integrated circuits have a few tens or hundreds of components, but discrete designs will employ hundreds or thousands of components by comparison. That makes for an extended and more costly design process, but results in the best sound for your money.

    Fully Balanced

    The Phono Box RS2 employs a true fully balanced design principle. Balanced transmissions consist of a hot and a cold (also called + and -) signal. Both the + and – signal chains effectively carry the same musical information. A true balanced amplifier can now extract the final musical information out the +/- signals and subtract, remove, all noise that could potentially be added along the transmission. In a true, fully balanced amplifier, like the Phono Box RS2, the + and – sections of both the left and right channel are treated individually, which doubles the amplifier sections by 2 as a result.

    Split passive EQ

    The Phono Box RS2 uses split passive equalization for both of its RIAA and DECA curves. This is more costly to design and implement but ensures the most accurate representation of the ideal EQ curve. Split passive equalization allows for better impedance matching and lower deviation from the ideal RIAA or DECA curve.

    Extreme cartridge loading options

    No other phono-preamp in the world has such fine options of setting the gain like the Phono Box RS2. Very large ranges from 40dB (voltage amplification by 100x) up to 70dB (voltage amplification by 3690x) are possible.

    Load impedance can be set continuously via potentiometer, a system invented by Pro-Ject Audio Systems. It allows you to seamlessly adjust the impedance during playback and immediately assess the impact of different loading options.

    Cartridges, by nature, suffer from small imbalances between the left and right channels. To correct this the Phono Box RS2 introduces a new feature that is absolutely rare in this price category. A potentiometer allows you to adjust the exact center of the sound stage in ranges of 2dB to the left or right.

    Steel/aluminium chassis

    The Phono Box RS2 has a steel chassis which is covered by screwed aluminium panels. This construction brings very good rigidity and splendid isolation against interferences.

    Power Box RS2 Phono – linear power supply upgrade

    An outboard power supply with linear construction is even better, because it can offer much cleaner power. When you want to manufacture such clean and really high-end power supplies, you have to use a transformer with a very low core saturation and preferably with shielding between primary and secondary windings. Obviously, such a transformer becomes larger than one would expect. Also, much more expensive. That is why such a power supply requires a cabinet the size of the Phono Box RS2 itself. Our Power Box RS uni 1- & 4-way will be another step up for your Phono Box RS2 performance.

    Technical Specifications

    Input impedance: Fixed 47kohms, variable 10 - 1000 ohms

    Load capacity switchable: 50, 100, 150, 200, 250, 300, 350, 400 pF

    Gain MM: RCA: 40, 43, 46, 50 dB (+6dB using XLR)

    Gain MC: RCA: 60, 63, 66, 70 dB (+6dB using XLR)

    Signal to noise ratio: MM (40dB): 89dB A-wt (10mV); MC (60dB): 79dB A-wt (1mV)

    THD: < 0,0015% (MM 40dB, 1kHz); < 0,0024% (MC 60dB, 1kHz)

    RIAA accuracy: within 0,4dB/20Hz - 20kHz

    Subsonic: at 20Hz with 18dB/octave

    Input: RCA & XLR

    Output: RCA & XLR

    Power supply: 20V/3A DC; 110 - 240V, 50/60Hz

    Power consumption: max 350mA DC

    Dimensions W x H x D (D with sockets): 206 x 72 x 200 (230)mm

    Weight: 1600g without power supply

    © 2024 www.AudioMonkey.ro

      Contul tau

      Ai uitat parola?

      Nu ai inca un cont pe Audio Monkey?
      Creaza cont