click to chat
Cauti un pachet PROMO personalizat?
Spune-ne de ce ai nevoie si revenim noi cu o oferta "de nerefuzat", :)!
Descriere
Caracteristici principale
- Cinci moduri Speech Clarity
- Modul Ambient Awarness pentru a ramane in contact cu cei din jur in timp ce vizionati filmul preferat
- Conectati-va la orice televizor prin transmitator TV Connector (AirStream™ de la Phonak) sau Bluetooth
- Conecati-va la telefon sau tableta prin Bluetooth
- Beneficiati de pana la 15 ore de baterie cu o singure incarcare
- Incarcare wireless
- Timp de incarcare ~ 2 ore ( ~3 ore cu incarcare wireless Qi)
- Transmitarorul de conecteaza la TV prin cablu Jack 3.5mm sau Tosklink
Specificații tehnice
Link producător:
Alte specificații
Article number (SKU): 119-3011-0610
Dimensions: 23.0 x 18.0 x 26.0 mm (earbuds) / 87.8 x 47.5 x 29.2 mm (charging case)
Weight: 63.7 g (both earbuds and charging case) / 5.7 g (6.9 g with ear coupling) / 49.9 g (charging case)
Wearing style: True Wireless stereo earphones
Ear Coupling: Ear canal with retention
Connectivity: Bluetooth 4.2 compliant, class 1, 10 mW (max)
Modulation: 2400.0 MHz to 2483.5 MHz
Supported Profiles: A2DP (SBC), HFP (CVSD, mSBC), AVRCP, DID
Transducer principle: Dynamic
Transducer size: 6mm diameter
Speaker frequency range: 20 Hz to 20 kHz
Speaker sensitivity: 100.5 dBSPL (1 kHz / 1 mW)
THD, total harmonic distortion: < 0,5% (1kHz / 94dB)
Active Noise Cancellation: Passive damping with Ambient Awareness mode
Microphone principle: MEMS
Frequency response (microphone): 100 Hz to 10 kHz
Microphone pick-up pattern: 1 mic for Ambient Awareness mode; 2 mic beamforming during call
Battery time: Up to 15 hrs streaming with TV Connector transmitter / Up to 12 hrs streaming with A2DP / 1.5 additional charges through charging case
Charging time: Approx. 2 hrs for full charge; approx. 3 hrs for wireless Qi-Charging
Battery type: Built-in Lithium-Ion rechargeable batteries; left/right earbud: 69 mAh, charging case: 490mAh
Power Supply: 5 V⎓, 600 mA max, USB charging via USB-C socket at charging case; Qi Wireless charging
App support: TV Clear App for iOS™ and Android™
Garanție (luni)
24
Utilizare casti
- Casti de zi cu zi
TV Clear Set
Advanced Speech Clarity
Ambient Awareness
Comfortable fit for long sessions
Features
Select one of five Speech Clarity programs to hear people on TV clearly
Use Ambient Awareness to stay in touch with your surroundings while you watch
Play TV sound through your True Wireless earbuds while the TV loudspeaker is also on at whatever volume others choose
Forget you’re wearing them thanks to secure and comfortable fit
Connect with any TV via TV Connector transmitter or Bluetooth and also use with mobile devices for media streaming
Pair as many Bluetooth earbuds with the connector at once as you please
Get up to 15 hours on a single charge — great for streaming fans.
Enjoy easy setup with the TV Clear App.
Make hands-free calls on your mobile phone
With Sennheiser’s Speech Clarity technology, it’s easy to understand what people are saying on the TV.
Get clear, easy-to-follow dialog, even if there is background noise or actors mumble. How does it work? Speech Clarity boosts higher frequencies when you use TV Clear, making language much easier to understand.
Choose from five Speech Clarity settings to personalize the amount of boost according to your preferences. TV will never be the same. Because it’s so much better when you don’t have to strain to listen.
Use Ambient Awareness to hear what’s happening around you while you use TV Clear.
What if someone asks you a question, or the doorbell rings while you’re using your earbuds? Some in-ear headphones can make it harder to perceive important sounds from your physical environment. Not TV Clear.
Simply enable Ambient Awareness, and you’ll hear what’s happening in your surroundings normally. Perfect for watching with family and friends — or when you’re expecting other visitors at home.
True Wireless TV Clear earbuds give you complete freedom. And they’re super-comfy to wear.
Say goodbye to cables that get tangled and cause noises when you move — with True Wireless TV Clear earbuds, you can walk around, lie on the couch, or do anything you please, in total comfort. There’s no headband to press on your glasses, either.
These lightweight earbuds also come with several sizes of ear adapters to ensure a perfect fit. The integrated retention (a small protrusion) keeps them snuggly nestled in your ear.
Connect the TV Clear earbuds to your TV with the transmitter or directly via Bluetooth to smart devices such as tablets, phones or laptops.
The transmitter uses your TV’s audio output jack (optical or analog), making it compatible with practically any set. It also ensures you get high quality with audio and video in sync.
The additional built-in Bluetooth connectivity in the earbuds lets you listen to media on the go. Use them with whatever devices you have along — and enjoy Speech Clarity everywhere. Once the earbuds are paired with your phone, you can also use them to make hands-free calls.
With long battery life and a convenient app, you get long sessions of listening tailored to your preferences.
Connected to the transmitter, your TV Clear earbuds offer 15 hours of operation on a single charge. Get another 22 hours by recharging with the case. That’s a total of 37 hours of clear listening without a wall outlet.
You can comfortably recharge wirelessly from a Qi qualified charging pad, or more traditionally through its USB-C charging cable.
What’s in the box
The TV Clear Set includes
(1) lightweight (6.9g) True Wireless earbuds,
(2) charging case,
(3) additional ear adapters,
(4) the transmitter, and all required cables.
The TV Clear App
In addition to adjusting key settings such as your Speech Clarity mode and Ambient Awareness, the free app lets you take full advantage of everything TV Clear has to offer.
TV Clear
Frequently Asked Questions
Sennheiser TV Clear first use
1. Download the TV Clear App
2. Read product documentation - see tab downloads
Troubleshooting
The following hints will solve the most common problems when using TV Clear for the first time.
Do you have any of the following situations?
- First connection to TV transmitter does not work
- Bluetooth pairing to the phone does not start
- The product does not charge properly
The reason is almost always an ear adapter that is not placed correctly.
There should only be a minimal gap visible between the rubber rim and the earphone rim.
The two claws at the top of the ear adapter rim (1) must snap into the two grooves on the earbud (2).
This is best achieved by placing the earbud with the button side down on a non-scratching surface, and then carefully sliding the rubber part down towards the earbud with your fingers.
So if you have one of the situations described above during setup
- check the correct fit of the two ear adapters as described above
- place both earbuds in the charging case again. The corresponding LED must light up
- close the lid of the charging case
- open the charging case again and wait 10 seconds
- after that the system is ready for use
| Problem | Solution |
| Earbudus do not connect with transmitter | If you do not hear sound from the TV when you first install the system
|
| Bluetooth connection with phone does not work | If you cannot find "Sennheiser TV Clear" in the list of Bluetooth devices on your phone.
|
| The product is not running stable or the above steps did not solve the problem | Restart both earbuds:
|
| The product is not loud enough / the volume is too low | There are mobile phones where you have to control the volume separately via the earbuds. |
How to install the TV Connector transmitter on your TV for the first time
One “TV Connector” transmitter can be paired with an infinite number of TV Clear devices so that you can use the same transmitter if you have more than one pair of earbuds.
To install the Sennheiser TV Clear set for the first time
1. Connect the micro-USB cable to the transmitter.
2. If an optical output (Toslink) is available on your TV, connect the thinner 3.5 mm plug of the optical cable to the 3.5 mm socket of the transmitter, then connect the other end of the optical cable to the TV's optical output.
Note: Alternatively you can use the analog 3.5 mm cable with an audio or headphone output on your TV.
4. Connect the USB cable to a power supply (5 VDC, >=500 mA), or use an USB socket on the back of your TV.
5. Switch on your TV. The LED on the back of the transmitter lights up green when power is available.
6. IMPORTANT: In the audio settings for your TV, set the digital audio output format to “PCM” or “Stereo”, but NOT Dolby.
7. Open the charging case first AND leave both earbuds inside the case for 10 seconds (after this initial opening the earbuds receive the final pairing information from the case).
8. Take the earbuds out of the charging case and the transmission of the TV audio will start automatically.
If they are not streaming
• If you purchased the TV Clear earbuds and the TV Connector streamer separately you must perform a manual pairing process first as described in this FAQ article .
• If you are using the optical cable, you must ensure that the digital audio output format is set to “PCM” or “Stereo”, but NOT Dolby. If this is not possible, you should use the analog audio cable instead.
Information about using the analog audio cable
• The TV loudspeaker may switch off when you plug in the analog audio cable. Please check your TV’s user guide for how to configure the TV loudspeaker.
• With most TVs, the volume of the headphone output can be adjusted separately. Make sure it is set to a high enough level.
How to manually pair Sennheiser TV Clear with your mobile phone or the TV Connector transmitter
Note: You only need to carry out the pairing process with a new device once. After the initial pairing, re-connection happens automatically.
Exception: If you purchased the TV Clear as a set with earbuds and the transmitter in the same box, the pairing will have already been done. On the very first use, it is important to wait 10 seconds after opening the lid of the charging case before taking out the earbud. See this article for details.
Put the TV Clear earbuds into pairing mode first
1. Place both earbuds in the charging case correctly.
• If the LEDs do not light up green but orange or red, charge the earbuds first.
• After a short press (<0.5 sec) of the pairing button, all 3 LEDs must light up. If this is not the case, clean the charging contacts, ensure the ear adapters are correctly mounted , and re-insert the buds in the case once again.
2. Press and hold the pairing button for 2 seconds until you see the middle LED flashing blue.
• If it does not start flashing, check point 1 again.
• You may need to close and re-open the lid, then press the button again for 2 seconds.
3. Wait until all 3 indicator lights flash blue (this can take up to 10 seconds) then continue the process with the phone (A) or the transmitter (B) as described below.
A: Pairing with the mobile phone
A1. Ensure Bluetooth is switched on on the phone.
A2. While all 3 LEDs are flashing blue on the TV Clear charging case, the “Sennheiser TV Clear” will show up in the list of devices on your phone.
A3. Select “Sennheiser TV Clear” to complete the pairing process. Depending on the phone, you may need to confirm the pairing process again.
A4. Once the pairing process is completed, the blue LEDs will stop flashing.
B: Pairing with the "TV Connector" transmitter
B1. Ensure the transmitter is connected to the power cable and you can see a green LED on the back.
B2. While all 3 LEDs are flashing blue on the charging case, briefly press the button on the back of the transmitter.
B3. Once the pairing process is completed, the blue LEDs will stop flashing.
Notes:
• After pairing, the earbuds will be “soft ejected” and will already be connected to the phone. This is the only time when the earbuds are in the case but connected to your device. In future they will only be able to connect when they are out of the charging case.
• After pairing, the left earbud is the primary earbud and it is best to take this one out of the charging case this first time.
Maximum number of paired devices
• A maximum of 6 devices can be paired to the earbuds and a maximum of 4 of those devices can be “TV Connector” transmitters.
• If a 7th device is paired this replaces the device that has been unused for the longest period.
• One “TV Connector” transmitter can be paired with an infinite number of TV Clear devices so that you can use the same transmitter if you have more than one pair of earbuds.
How to reset the Sennheiser TV Clear Earbuds
In the rare case where your TV Clear earbuds are unresponsive, or if you simply would like to restore the factory settings, you can reset them as follows.
Soft reset
(your settings are kept)
1. Press the button on each earbud for 15 seconds. You can do both at the same time or one after the other.
2. Place the right earbud in the charging case and wait for 10 seconds.
3. Then place the left earbud in the case and wait for another 10 seconds.
4. Now continue to use them normally.
Factory reset
If the soft reset did not solve the problem, try a factory reset.
Note: This will delete all paired devices and restore the factory default settings.
1. Place both earbuds in the charging case.
2. Ensure all 3 LEDs light up when you open the lid of the charging case. You should also ensure that the rubber ear adapter is correctly placed on the earbud and the earbuds sit firmly in the charging case.
3. Press and hold the pairing button for 2 seconds until you see a flashing blue LED.
4. Wait until all 3 LEDs flash blue. This may take up to 30 seconds.
5. As soon as all 3 LEDs flash blue, press the pairing button twice and the LEDs will flash orange now.
6. Wait until the orange flashing stops. This may take up to 20 seconds.
7. Now you have to re-pair them with your device.
Learn how the controls work on the Sennheiser TV Clear earbuds
The Sennheiser TV Clear earbuds offer three ways to control various features.
Button control
Each earbud has a real button with a click feeling in the middle of the button surface. The right button is “up/more”, the left button is “down/less” and is not configurable.
• A short press (<0.5 sec) adjusts the volume.
• A long press (press and hold for > 2 sec) changes the Speech Clarity program.
• An ultra-long press (press and hold for >15 sec) will switch off the earbud.
Configurable Touch Control
The Touch Control can be configured via the TV Clear app. The default configuration is:
• Left = Pause/Resume.
• Right = Ambient Awareness Off/On.
To trigger the feature, double-tap gently but decisively on the frame of the earbud.
Notes:
• Other features can be selected and configured using the TV Clear app.
• The controls only work if the earbud is inserted into your ear.
Automatic streaming pause
By default, the audio stream will be paused when you take the second earbud out of your ear. The TV Clear app allows you to change the default behavior in “Settings - Pause on earbud removal”.