Amplificator NAD C 328

NAD
Share

Ridicare gratuita din showroom

Cod produs: ref.37104

In stoc

2.099 lei / Bucata 3.245 lei Vezi oferta REsigilate de la 2.049 lei

30 de zile perioada de retur

Garantie 24 luni

Transport gratuit pentru comenzi peste 100 RON in Romania

Livrare prin curier sau ridicare din showroom Bucuresti

Pentru plata în rate alegeți NETOPIA ca procesator de plăți.

6 Rate

Card Avantaj

6 Rate

Alpha Bank

6 Rate

6 Rate

Banca Transilvania

6 Rate

Garanti Bank

12 Rate

Raiffeisen Bank (in showroom)

Descriere

2 x 50W into 8 or 4 Ohms
Integrated Bluetooth® for added music streaming flexibility
Analogue In/Headphone Out
Frequency response ±0.3 dB (20 Hz – 20 kHz)
THD (20 Hz – 20 kHz) 0.005 % at 1 V out
Built-in Phono Preamp for Turntables
Stereo Line, Optical Digital and Coax Digital inputs

Alte informatii

Link producator: click aici

Continut pachet: vezi detalii ascunde detalii

Two detachable mains power cord
AMP 3 remote control with 3V CR2025 battery
Bluetooth antenna
Quick Setup Guide

Manual: descarca fisierul

Fisa de produs: descarca fisierul

Cauti un pachet PROMO personalizat?

Spune-ne de ce ai nevoie si revenim cu o oferta " de nerefuzat "

Disponibil ca RE-Sigilat

Produs VERIFICAT de un expert Audio Monkey - functioneaza perfect si nu are niciun defect sau semn de utilizare. Beneficiaza de garantie si drept de retur la fel ca un produs nou.

Amplificator NAD C 328 resigilat

Stoc: intreaba despre disponibilitate

Resigilat

2.049 lei

Specificatii tehnice Amplificator NAD C 328

Analogue In/Headphone Out
Continuous output power into 8 Ohms
and 4 Ohms: 50W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
THD (20 Hz – 20 kHz): <0.005 % at 1 V out
Signal-to-Noise Ratio: >100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain)
Frequency response: ±0.3 dB (20 Hz – 20 kHz)
Output impedance: 11 ohms

Analog In/Subwoofer Out
THD (20 Hz – 20 kHz): <0.005 % at 1 V out
Signal-to-Noise Ratio: >100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain)
Frequency response: ±0.2 dB (20 Hz – 20 kHz)
Output impedance: 200 ohms

Analog In/Speaker Out
THD (20 Hz – 20 kHz): <0.03 % (100 mW to 40 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio: >95 dB (A-weighted, 500 mV input, ref. 1 W out 8 ohms)
Frequency response: ±0.3 dB (20 Hz – 20 kHz)

Phono In/Speaker Out
THD (20 Hz – 20 kHz): <0.03 % (200 mW to 40 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio: >75 dB with IHF MM cartridge (A-weighted, ref. 5mV input 1 kHz and 1W output in 8 ohms)
Frequency response(RIAA deviation): ±0.3 dB (20 Hz – 20 kHz)
Note:The RIAA response is consistent with a pre-emphasis that is rolled off at 50kHz by a second order filter, such as used in Neumann cutting lathes.

Power consumption
at ECO Standby mode: 0.5 Watts*
at Control Standby mode: 0.6 Watts**
OFF mode (Power switched OFF): 0 Watts
* – After 20 minutes of no user interface interaction and no active source input
** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input
NOTE: Bluetooth connectivity is always live when configured.

Dimensions & Weight
Gross dimensions (W x H x D): 435 x 70 x 285 mm (17 1/8 x 2 13/16 x 11 1/4″)
Net weight: 4.9 kg (10.8 lbs)
Shipping weight: 5.9 kg (13.0 lbs)

NAD C 328 Hybrid Digital DAC Amplifier

For 45 years, NAD Electronics has introduced aspiring audiophiles to the vast world of hi-fi. From our flagship Masters Series, to our budget-friendly Classic Series, NAD has a component for everyone. Following in the footsteps of some of NAD’s greatest units, the NAD C 328 delivers the most fundamental of features, while firmly adhering to NAD’s unwavering commitment to exquisite sound. The C 328 can wirelessly connect to any smartphone, tablet, or Bluetooth-enabled device within range, to give you a seamless listening experience.

Getting the Basics Right

When it comes to Classic Series amplifiers, no feature is overlooked. Low noise circuits, precise volume control action, and accurate channel balance are all key characteristics of the C 328. With the added bonus of proper input and output impedance traits, plus high overload margins and stability with difficult speaker loads, the C 328 is the best choice for audiophiles who are just starting to build their dream systems. The C 328 also includes a MM phono stage with precisely correct RIAA equalization, high overload margins, extremely low noise, and an innovative circuit to suppress infrasonic noise that is present on all LPs—all without affecting bass response.

Versatility in Spades

The line inputs of the C 328 can accommodate all kinds of analogue source components. It offers ideal input impedance attributes with linear, ultra-low noise buffer amplifiers to prevent any sonic degradation caused by improper loading of the source device. The C 328 also features a separate headphone amplifier with low output impedance and very high output voltage capability, enough in fact to drive even high impedance studio monitor headphones. The low impedance line outputs can also connect to a subwoofer to further extend the versatility of the C 328.

Ready for Streaming

With support for Bluetooth, you can instantly connect and listen to the music service of your choice, or wirelessly stream music and playlists stored directly on your smartphone, tablet or computer. Plus, with its high performance digital circuitry, Bluetooth streaming has never sounded as good as it does with the C 328.