Amplificator integrat NAD C 389

Name: Amplificator integrat NAD C 389
Brand: NAD
SKU: NADC389
Price: 5699.0 RON
Availability: OutOfStock

Form

Ridicare gratuita din showroom

Cod produs: NADC389

In stoc

5.699 lei / Bucata 7.999 lei Vezi si pachete PROMO

30 de zile perioada de retur

Garantie 24 luni

Transport gratuit pentru comenzi peste 100 RON in Romania

Livrare prin curier sau ridicare din showroom Bucuresti

Pentru plata în rate alegeți NETOPIA ca procesator de plăți.

6 Rate

Card Avantaj

6 Rate

Alpha Bank

6 Rate

BRD

6 Rate

Banca Transilvania

6 Rate

Garanti Bank

12 Rate

Raiffeisen Bank (in showroom)

Descriere

Amplificator C 389 HybridDigital UcD in configurație integral balansata bridge
2 x 130 Watts RMS în 8 / 4 ohmi
HDMI-eARC
Două porturi MDC2 pentru modul BluOS opțional și alte funcționalități extinse
32-bit/384kHz ESS Technology Sabre DAC chip
Distorsiuni insesizabile pe intreaga gama de frecvente
MM phono stage with infrasonic filtering circuitry Vanishingly low harmonic and intermodulation distortion
Two optical, two coaxial digital inputs
Two pairs of line-level analogue inputs with ultra-low-noise buffer amplifiers
Speaker A, speaker B output
Optional MDC2 BluOS-D module adds BluOS Hi-Res multi-room music streaming and Dirac Live room correction
Jitter-free 32-bit/384kHz ESS Sabre 9028 DAC
Bluetooth aptX-HD playback
Dual subwoofer outputs
Dedicated headphone amplifier
CI-Friendly – IR remote, 12V Trigger in/out, IR in/out, RS-232 Serial port
Seamless integrations with smarthome control systems such as Control4, Crestron, RTI, URC, Lutron, and Elan

Alte informatii

Link producator: click aici

Manual: descarca fisierul

Fisa de produs: descarca fisierul

Cauti un pachet PROMO personalizat?

Spune-ne de ce ai nevoie si revenim cu o oferta " de nerefuzat "

Specificatii tehnice Amplificator integrat NAD C 389

LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz): <0.002 % at 2 V out
Signal-to-Noise Ratio: >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
Channel separation: >100dB (1 kHz); >90 dB (10 kHz)
Input Impedance (R and C): 56 kohms + 100 pF
Maximum input signal: >4.6 Vrms (ref. 0.1 % THD)
Output impedance: Source Z + 320 ohms
Input sensitivity: 65mV (ref. 500 mV out, Volume maximum)
Frequency response: ±0.3 dB (20 Hz – 20 kHz)
Maximum voltage output -IHF load: >>5 V (ref. 0.1 % THD)

PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz): <0.01% at 2 V out
Signal-to-Noise Ratio: >84dB (200 ohms source; A-weighted, ref. 500 mV out)
Input sensitivity: 46 kohms/100 pF
Frequency response: ±0.3 dB (20 Hz – 20 kHz)
Maximum input signal at 1kHz: >80 mVrms (ref. 0.1 % THD)

LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz): <0.005% at 1V out
Signal-to-Noise Ratio: >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
Frequency response: ±0.3 dB (20 Hz – 20 kHz)
Channel separation: >62 dB at 1kHz
Output impedance: 2.2 Ohms

LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
Continuous output power into 8 ohms and 4 ohms: 2 x 130W
THD (20 Hz – 20 kHz): <0.02% (250 mW to 130 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio: >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power: 150W
IHF dynamic power:
210W into 8 ohms
300W into 4 ohms
350W into 2 ohms
Peak output current: >26A (in 1 ohm, 1ms)
Damping factor: >150 (ref. 8 ohms, 20Hz to 6.5kHz)
Frequency response: >±0.3 dB (20 Hz – 20 kHz)
Channel separation: >90dB (1 kHz)>75dB (10 kHz)
Input sensitivity (for 130 W in 8 ohms): Line In: 201 mV, Digital In: 10.25% FS

GENERAL SPECIFICATIONS
Supports bit rate/sample rate: up to 32 bit/384 kHz
Frequency band: 2.402GHz- 2.480GHz
Maximum transmit power (dBm): 7 dBm ± 2 dBm

DIMENSIONS AND WEIGHT
Gross dimensions (W x H x D): 435 x 100 x 390mm (17.1 x 3.9 x 15.4“)
Net Weight: 8.7kg (19.1lb)
Shipping weight: ~11kg (24.2lb)