Amplificator casti iFi Audio xCAN

Form
Ridicare gratuita din showroom

Cod produs: xCAN

In stoc

1.099 lei / Bucata 1.499 lei

      • 30 de zile perioada de retur
      • Garantie 24 luni
      • Transport gratuit pentru comenzi peste 100 RON in Romania
      • Livrare prin curier, easybox sau ridicare din showroom Bucuresti
      • Pentru plata în rate alegeți NETOPIA ca procesator de plăți.
      Bank logo
      6 Rate
      Card Avantaj
      Bank logo
      6 Rate
      Alpha Bank
      Bank logo
      6 Rate
      BRD
      Bank logo
      6 Rate
      Banca Transilvania
      Bank logo
      6 Rate
      Garanti Bank
      Bank logo
      12 Rate
      Raiffeisen Bank (in showroom)

      Descriere

      • Amplificator analog de ultima generatie, iFI xCAN ridica calitatea oricarei surse si ofera modulurile X-Bass II si 3D+
      • Impedanta casti recomandata: 16~600 Ohm
      • Autonomie: 8 hours

      Alte informatii

      Link producator: click aici

      Continut pachet: vezi detalii ascunde detalii
      1x xCAN
      1x USB C- USB C & USB A- USB C Cable
      1x Quick Set-up guide
      1x Warranty Card
      Fisa de produs: descarca fisierul
      Bundle image

      Cauti un pachet PROMO personalizat?

      Spune-ne de ce ai nevoie si revenim cu o oferta " de nerefuzat "

      Specificatii tehnice Amplificator casti iFi Audio xCAN

      DIMENSIONS: 95 (l) x67 (w) x19 (h) mm
      FREQUENCY RESPONSE: < 2Hz – > 200kHz (-3dB)
      GAIN: -95dB to +18dB adjustable in 114 1dB steps (using volume control)
      INPUT:
      Wireless: ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)(@ 3.8V)
      Wired: 3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS)
      *ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources. No USB audio input
      MAXIMUM INPUT LEVEL:
      S-Balanced: 3V RMS
      Balanced: 6V RMS
      MAXIMUM OUTPUT POWER:
      S-Balanced: > 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm
      Balanced: > 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm)
      NET WEIGHT: 127g (0.28 Ibs)
      OUTPUT IMPEDANCE:
      S-Balanced: <1 Ohm
      Balanced: <2 Ohm
      PLAYBACK TIME: 18 hours (analogue) or 12 hours (Bluetooth) (charging via USB port)
      RECOMMENDED HP IMPEDANCE: 16~600 Ohm
      SNR:
      S-Balanced: > 121dBA (@ 3.8V)
      Balanced: >120dBA (@ 7.6V)
      THD+N:
      S-Balanced: < 0.005% (@ 100 mW/1.26V 16 Ohm)
      Balanced: < 0.006% (@ 360 mW/2.4V 16 Ohm)

      xCAN

      The xCAN is a portable amplifier above all else and is for anyone who wants to squeeze every last drop of performance out of their expensive headphones.

      Using a high-end DAP that has an adequate onboard DAC but lacks power? Happy with your existing source but need more juice?

      Just add the xCAN to drive bigger and better headphones and boost your tunes.


      Blinding Bluetooth

      The xCAN delivers CD-Quality Bluetooth via AAC, aptX and aptX LL with added iFi magic.

      Stream wirelessly from your smartphone. Bluetooth from your TV to the xCAN. No need for wires. Just plug your headphones into the xCAN at your side.

      Give soundtracks extra energy. Add oomph to your gaming! Hear the whoosh of an arrow or the full throttle of F1 car in all their glory.

      Wicked wiring

      Connect via analogue 2.5/3.5 connection. iFi’s exclusive S-Balanced technology means that you gain the advantages of a balanced connection even when using an unbalanced one.

      On headphones this means lower distortion, less interference and less crosstalk.

      And it enables you to take advantage of the growing number of balanced sources, such as high-end DAPs.

      A pure power house

      The xCAN is a dual-mono headphone amplifier with a maximum power output of 1000mW per channel. It will happily drive your favourite headphones.

      And we added our signature sonic extras as well.

      3D+® opens up your music to give you the spaciousness of a live-concert atmosphere.

      The XBass Ⅱ® analogue bass correction system corrects headphone/speaker bass response to deliver a more natural sound to the midrange frequencies.

      Clever. Curvy.

      The xCAN smart battery provides up to 18 hours of playback time (analogue) or 12 hours (Bluetooth) depending on your choice of headphones. That’s one very long train journey!

      And finally, check out the curvy chassis and lush LEDs. The xCAN is one lovely lady.


      Extensive jitter-eradication technologies are applied to the digital stage, including our GMT (Global Master Timing) femto-precision clock and intelligent memory buffer. This represents a total ‘out-of-the-box’ systematic digital solution that solves jitter once and for all.

      iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.

      Our 3D+ Holographic® delivers an immersive, deep soundstage. Check it out here.

      Our new XBass ® adds even more musical satisfaction. The XBass ® analogue bass correction system corrects headphone bass response to deliver a more natural sound to the upper bass frequency band. More here.

      With a separate power input (USB Type C) to charge the internal battery, it does not draw from your smartphone or playback device.

      Playback time is 12 (via Bluetooth® as input) to 18 (as analogue amplifier only) hours.

      This unit features the iFi Cyberdrive® headphone amplifier stage. You won’t find it in Star Wars or Star Trek. Unravel its mysteries here.

      The unit boasts a dual-mono headphone amplifier with a maximum 1000mW of power per channel which can unleash the full potential of both 32ohm through to 600ohm headphones. It offers balanced in/out to take full advantage of the growing availability of balanced sources and headphones. The 2.5mm balanced headphone jack means the it can be used to boost the amplification of high-end DAPs.

      Technical Specifications

      Inputs  
      Wireless ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)
      Wired 3.5mm (TRS or TRRS S-Balanced*) and 2.5mm (TRRS)
      *ONLY found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources.
      No USB audio input
      Max Output  
      S-Balanced > 3.8V / 45 mW (@ 300 Ohm)> 3.5V / 380 mW (@ 32 Ohm)> 3.1V / 600 mW (@ 16 Ohm
      Balanced > 7.6V / 90 mW (@ 600 Ohm)> 7.2V / 800 mW (@ 64 Ohm)> 5.7V / 1,000 mW (@ 32 Ohm)
      THD & N  
      S-Balanced < 0.005% (@ 100 mW/1.26V 16 Ohm)
      Balanced < 0.006% (@ 360 mW/2.4V 16 Ohm)
      SNR  
      S-Balanced > 121dBA (@ 3.8V)
      Balanced >120dBA (@ 7.6V)
      Recommended HP Impedance 16~600 Ohm
      Output impedance  
      S-Balanced <1 Ohm
      Balanced <2 Ohm
      Max. Input  
      S-Balanced 3V RMS
      Balanced 6V RMS
      Gain -95dB to +18dB adjustable in 114 1dB steps (using volume control)
      Frequency Response < 2Hz – > 200kHz (-3dB)
      Playback Time 18 hours (analogue)
      or
      12 hours (Bluetooth)
      (charging via USB port)
      Dimensions 95 (l) x67 (w) x19 (h) mm
      Weight 127g (0.28 Ibs)

      Produse recomandate

      Avem mereu noutati - fii printre primii care descopera aparitiile de ultima ora in lumea audio-video!

      © 2025 www.AudioMonkey.ro, Susținut de Shopify

        Contul tau

        Ai uitat parola?

        Nu ai inca un cont pe Audio Monkey?
        Creaza cont