DAC Benchmark DAC3 HGC Black

BenchmarkVariantă: Black Cod: DAC3_HGCblack
Variante:
Preț de listă 12.500 lei 9.299 lei
Transport gratuit
30 de zile retur "no comment"
Garantie 24 luni
Descriere

Caracteristici principale

  • SNR – A-Weighted, 0 dBFS = +27 dBu 128 dB
  • SNR – Unweighted, 0 dBFS = +27 dBu 126 dB
  • 5 Digital inputs (1 USB, 2 Optical, 2 Coaxial)
  • 2 Channels
  • Input Sample Frequency Range: 28 to 210 kHz (Coaxial Inputs), 28 to 96 kHz (Optical Inputs), 44.1, 48, 88.2, 96, 176.4, 192 kHz (USB Input)
  • Digital Input Impedance: 75 Ohms
  • Min. digital input level: 250 mVpp
  • 2 Analog Outputs
  • Output power: 1.25W into 30 Ohms
Specificații tehnice

Greutate produs

1.36 kg

Dimensiuni produs

(W x H x D): 249 x 44.5 x 237mm

Alte specificații

THD+N, 1 kHz at 0 dBFS -113 dBFS, -113 dB, 0.00022%
THD+N, 1 kHz at -1 dBFS -114 dBFS, -113 dB, 0.00022%
THD+N, 1 kHz at –3 dBFS -119 dBFS, -116 dB, 0.00016%
THD+N, 20 to 20 kHz test tone at –3 dBFS -113 dBFS, -110 dB, 0.00032%

Frequency Response at Fs=192 kHz +0 dB, -0.015 dB (20 to 20 kHz)
-0.015 dB at 10 Hz
-0.005 dB at 20 kHz
-0.031 dB at 40 kHz
-0.15 dB at 80 kHz

Frequency Response at Fs=48 kHz
+0 dB, -0.015 dB (20 to 20 kHz)
-0.015 dB at 10 Hz
-0.005 dB at 20 kHz
Crosstalk-137 dB at 20 Hz
-130 dB at 1 kHz
-116 dB at 20 kHz

Maximum Amplitude of Jitter Induced Sidebands (10 kHz 0 dBFS test tone, 12.75 UI sinusoidal jitter at 1 kHz) < -144 dB
Maximum Amplitude of Spurious Tones with 0 dBFS test signal < -138 dB
Maximum Amplitude of Idle Tones < -147 dB
Maximum Amplitude of AC line related Hum & Noise < -133 dB

Inter-channel Differential Phase (Stereo Pair – any sample rate) +/- 0.25 degrees at 20 kHz
Inter-channel Differential Phase (Between DAC3 Units Fs<110 kHz) Any sample rate. +/- 0.25 degrees at 20 kHz

Garanție (luni)

24

Conversie DSD nativa


Toate intrarile digitale ale lui DAC3 suporta conversie nativa PCM sau DSD. Din orice intrare, DSD este transportat catre DoP 1.1. DSD si PCM, fiind convertite nativ la analog. Nu exista conversii DSD la PCM sau PCM la DSD care sa compromita calitatea muzicala. Sistemul de conversie al lui DAC3 comuta cu usurinta între conversie PCM nativa si DSD nativa.

Conectivitate directa la amplificatoarele de putere


Convertoarele lui DAC3 sunt concepute sa conduca direct amplificatoarele de putere si difuzoarele. Convertoarele Benchmark dispun de atenuatoare ajustabile de impedanta scazuta la iesirile XLR ce pot fi utilizate pentru optimizarea interfetei catre amplificatorul de putere. Aceasta functie unica optimizeaza gain staging-ul între DAC si amplificatorul de putere.