Caracteristici principale
- Boxa Dolby Atmos
- Difuzoare : 1 x tweeter 2.5 cm + 1 x mid-woofer 13 cm - Design Coaxial
- Raspuns in frecventa : 105 Hz – 28 kHz
- Sensibilitate : 86dB ( 2.83V @ 1 m )
- Impedanta nominala: 8 ohm (min. 4.6ohm)
- Amplificare recomandata: 10-100 W
Link producător:
Greutate produs
Dimensiuni produs
Alte specificații
Crossover frequencies: 2.5kHz
Maximum output: 106dB
Garanție (luni)
Q SERIES
Q50a Dolby Atmos-Enabled Surround Speaker
Q50a brings immersive Dolby Atmos height to Q Series home theatre systems. It is also easily mounted on the wall for a high-fidelity surround sound experience. Its Damped Tweeter Loading Tube produces a detailed and natural high frequency sound, and the styling means the Q50a will blend seamlessly into any interior.
"Sit anywhere" Uni-Q sound
The Uni-Q driver array places the tweeter in the centre of the midrange and bass cone, bringing the acoustic ideal of a single point source closer than ever. The result, enhanced by KEF's 'tangerine' waveguide over the tweeter, is a more accurate three-dimensional sound that's dispersed evenly throughout the room.
Tweaking the tweeter
With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.
A word about drums and bass
The Q Series reproduces the nuances of bass instruments with ease. With a larger roll surround and new suspension KEF drivers produce cleaner bass at high volumes. A new cone structure improves midrange clarity and an enhanced Auxiliary Bass Radiator (ABR) with a new surround and rear suspension enhances bass quality.
New system design
Putting the Uni-Q driver in its own sealed cabinet reduces the load on the cone and increases clarity and detail while delivering cleaner bass. Midrange clarity is enhanced by driver improvements that mean the DC blocking capacitor to be eliminated from the crossover, allowing a more natural roll-off between drivers.
Technical Specifications
Design: Two-way Closed Box
Sensitivity (2.83V/1m): 86dB
Frequency range Free Field (-6dB): 96Hz-19.5kHz
Frequency Response (±3dB): 105Hz-18.5kHz
Amplifier requirements: 10-100W
Crossover frequency: 2.5kHz
Drive units:
130mm (5.25in.) aluminium Uni-Q
25mm (1in.) vented aluminium dome HF
Maximum Output: 106dB
Nominal impedance: 8Ω (min.3.7Ω)
Dimensions (H x W x D): 174 x 180 x 259 mm
Dimensions (H x W x D) with Rubber Feet: 178 x 180 x 259 mm
Net Weight: 4.25kg (9.4 lbs)